Water tank Waterproofing: What you should know!

Water tanks are normally installed underground or overhead in large complexes and sometimes small houses.

Water tanks are normally installed underground or overhead in large complexes and sometimes small houses. As a consequence, water can seep through the common joints between the house and the tank at any time, particularly if the tank is poorly constructed or simply not waterproofed. This is a major risk because leakage and seepage will damage the interior walls and also cause health problems. and even result in health complications to the inhabitants.

It takes a long time to fix an old water tank. The precise position of the leakage is very difficult to pinpoint. Water leaks into the smallest capillaries and can be seen or trickle through a section of the system while the source of the leak is currently somewhere.

Let’s take a look at how to deal with these issues with water tanks and what the best option is.

Two ways to waterproof a water tank

You should waterproof your water tank in two ways:

The traditional method is to apply cement slurry, which would temporarily avoid the leakage. It’s just a temporary fix for waterproofing the tank, and it’s done to stop leaks from cracks and joints.

The most cost-efficient and effective approach requires a lot more effort, but it is a long-term solution. It’s a two-step process that begins with saturating the surface to be treated with a high-performance Polymer modified cement-based coating. Over the handled surfac, the second stage entails fully waterproof grouting of the building joints with a polymer modified mortar.

Why opt for the polymer modified mortar option?

The polymer-modified mortar solution outperforms the standard approach by a broad margin.

The treatment includes fixing any cracks, leaks, and other joints that are vulnerable to leakage. The water tank is properly drained of soil, grease, and other loose material prior to the repair. This means that the procedure is not simply a band-aid solution, but that the entire surface is cleaned and waterproofed.

A latex and cement or rubber and cement ratio is used, which is much more stable than traditional cement slurry. Simple concrete is less durable and can break with time.

Instead of only treating the trouble spots, the whole surface is treated. As a result, it is a lot more long-term approach.

Water tank leaks are an example of a serious home fix that can never be overlooked. They can do a huge amount of harm, and the adage “a stitch in time saves nine” is really applicable in this case. Waterproofing provides homeowners with long-term peace of mind while still protecting their properties.